Calculator — dilutions

Dilution calculator for nurses

Use C1V1 = C2V2 to find the stock solution and diluent for a dilution.

Short answer: Dilution uses C1 × V1 = C2 × V2. To make 20 mL at 10 mg/mL from a 50 mg/mL stock you need V1 = (10 × 20) ÷ 50 = 4 mL of stock plus 16 mL of diluent.

Dilution calculator

Enter the stock concentration, the concentration you need and the total volume.

Work out a dilution

The dilution formula

The amount of drug stays the same before and after dilution, so C × V is equal on both sides.

C1 × V1 = C2 × V2
V1 = (C2 × V2) ÷ C1  |  Diluent = V2 − V1
Worked example: Stock is 100 mg/mL and you need 50 mL at 20 mg/mL. V1 = (20 × 50) ÷ 100 = 10 mL of stock. Diluent = 50 − 10 = 40 mL.
01

C1 and V1: the stock

The stronger solution you start with. V1 is usually the unknown.

02

C2 and V2: the finished solution

The weaker solution you end up with, in its total volume. The diluent is V2 − V1.

Need the dose first? Use the dosage calculator. Strengths in percent are on percent to mg/mL, infusions on the IV flow rate calculator, and the full topic in dosage calculations for nursing.

Study aid, not for clinical decisions: These examples are for learning only. In practice, follow your facility's policy, check a drug reference and have the calculation verified.

Frequently asked questions

How do you calculate a dilution?+

Use C1 × V1 = C2 × V2 and solve for V1: V1 = (C2 × V2) ÷ C1. C1 and V1 are the stock; C2 and V2 are the finished solution.

What do C1, V1, C2 and V2 mean?+

C1 is the stock concentration, V1 is the volume of stock to draw up, C2 is the required concentration and V2 is the total final volume.

What do you top the dilution up with?+

The remaining volume (V2 − V1) is made up with diluent, such as sterile water or 0.9% sodium chloride, as ordered or as the problem states.

Why does the calculator show nothing when C2 is higher than C1?+

You cannot make a stronger solution by adding diluent, so C2 must be lower than or equal to C1.

Do C1 and C2 need the same units?+

Yes. Use mg/mL for both, or percent for both, so the units cancel.

Back to the dosage calculations guide →

Practice dilutions in Dos

Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.