Formula sheet

Dosage calculations formula sheet to print

All the core dosage calculation formulas on one page, each with a worked example.

Short answer: a dosage calculations formula sheet collects the core formulas: desired over have (D ÷ H × Q), unit conversions, lb to kg, dose by weight, percent to mg/mL, dilution, flow rate, drip rate and mcg/kg/min. Each has a worked example below.

Formula sheet for dosage calculations

Print it or save it as a PDF from your browser (use the print dialog and choose Save as PDF).

TopicFormulaExample
Desired over haveD ÷ H × Q(75 ÷ 25) × 1 tablet = 3 tablets
mg to mcgmg × 1,000 = mcg0.25 mg = 250 mcg
g to mgg × 1,000 = mg0.5 g = 500 mg
lb to kglb ÷ 2.2 = kg154 lb = 70 kg
Dose by weightmg/kg × kg = mg5 mg/kg × 70 kg = 350 mg
Daily dose to single dosemg/day ÷ number of doses600 mg/day ÷ 3 = 200 mg
Percent to mg/mL% × 10 = mg/mL2% = 20 mg/mL
Ratio strength1:1,000 = 1 g in 1,000 mL = 1 mg/mL1:10,000 = 0.1 mg/mL
Concentrationmg ÷ mL = mg/mL500 mg in 250 mL = 2 mg/mL
DilutionC1 × V1 = C2 × V210 mg/mL to 1 mg/mL, 100 mL: V1 = 10 mL
Flow ratemL ÷ hours = mL/h1,000 mL ÷ 8 h = 125 mL/h
Drip rate(mL × gtt/mL) ÷ minutes = gtt/min(500 × 15) ÷ 240 = 31.25, about 31 gtt/min
Infusion timemL ÷ mL/h = hours500 mL ÷ 125 mL/h = 4 h
mcg/kg/min to mL/hdose × kg × 60 ÷ mcg/mL5 × 70 × 60 ÷ 1,600 = 13.1 mL/h
Body surface area (Mosteller)BSA (m²) = √(height cm × weight kg ÷ 3,600)170 cm, 70 kg: √(11,900 ÷ 3,600) = 1.82 m²

Units and household equivalents

UnitEquals
1 kg1,000 g, or about 2.2 lb
1 g1,000 mg
1 mg1,000 mcg
1 L1,000 mL
1 tsp5 mL
1 tbsp15 mL (3 tsp)
1 oz (fluid)30 mL

Always write mcg, never the symbol µg, and write a zero before a decimal point (0.5 mg, not .5 mg) without a trailing zero (5 mg, not 5.0 mg). Many programs teach these safe-writing conventions; check yours.

Five steps on every problem

01

Read the whole order

Drug, dose, route and frequency.

02

Match the units

Convert so desired and have use the same unit. See nursing math conversions.

04

Round last

Keep full precision until the final answer and follow your course's rounding rule.

05

Check it

Does the amount make sense for a tablet, a syringe or a pump? If not, recompute a different way.

For flow rates use the IV flow rate calculator, and for concentration see how to calculate mg per mL. Practice with the 12 practice problems.

Study aid only: This page is a study aid for learning how dosage calculations work. It is not for clinical decisions. In practice, follow your facility's policies, check against a current drug reference and have high-risk calculations independently verified.

Using the sheet well

A formula sheet only helps if you know which formula answers which question. Start every problem by naming the unit of the answer. If it is tablets or mL for one dose, use desired over have. If it is mL per hour, you need a volume and a time. If it is drops per minute, you also need the drop factor from the tubing. If it is a rate in mcg/kg/min, you need weight and concentration.

Keep one worked example beside each formula. Seeing "(75 ÷ 25) × 1 = 3 tablets" next to D ÷ H × Q makes the pattern stick faster than the bare formula. When you study, cover the example column and reproduce it from the formula column, then do the reverse.

Two habits protect you on every row of the table. Write the unit after every number, and do the reasonableness check at the end. A pump rate of 2,500 mL/h or a dose of 0.004 tablet means a unit or decimal slip, not an unusual order. For deeper explanations read dosage calculations basics and see every formula applied in dosage calculations examples.

Frequently asked questions

Can I save the formula sheet as a PDF?+

Yes. Use your browser's print function and choose Save as PDF. The page is built to print on one or two sheets.

Can I bring a formula sheet to my exam?+

That is decided by your instructor or program. Ask before the exam, and do not assume it is allowed.

Where are all the formulas?+

The table on this page covers the core ones. Each row links to a lesson through the course page and the related guides.

Are the examples correct?+

Yes. Every example was recomputed. They are generic study examples, not real orders.

What is the most important formula?+

Desired over have: D ÷ H × Q. Most tablet, liquid and injection problems use it.

Is D/H × Q the same as dimensional analysis?+

They give the same answer. Dimensional analysis lays the units out so they cancel, which is useful for multi-step problems.

Why 2.2 for pounds to kilograms?+

One kilogram is about 2.2 pounds. Many courses use 2.2 exactly; follow the value your course gives.

What drop factors are common?+

Sets of 10, 15 and 20 gtt/mL are common for standard tubing, and 60 gtt/mL for microdrip. The factor is printed on the tubing package and varies by set.

Practice with the formulas

Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.