mcg/kg/min

mcg per kg per minute calculation

How to turn a dose in mcg/kg/min into a pump rate in mL/h, and back, with seven worked examples.

Short answer: to calculate mcg per kg per minute as a pump rate, use mL/h = (dose in mcg/kg/min × weight in kg × 60) ÷ concentration in mcg/mL. Convert mg to mcg first, pounds to kilograms by dividing by 2.2, and check the answer for reasonableness.

Why the chain of units is the whole problem

Pump doses such as mcg/kg/min combine weight, time and concentration. The arithmetic is simple. What goes wrong is the units: mg against mcg, minutes against hours, and the patient's weight in pounds instead of kilograms. If you write the units at every step and let them cancel, the answer falls out.

The formula and the unit analysis

mL/h = (mcg/kg/min × kg × 60 min/h) ÷ (mcg/mL)

Unit check: mcg/kg/min × kg = mcg/min. × 60 = mcg/h. ÷ mcg/mL = mL/h. The 60 is there because pumps run in mL per hour and the dose is per minute.

From "X mg in Y mL" to concentration: divide mg by mL, then multiply by 1,000 to get mcg/mL. 400 mg in 250 mL is 1.6 mg/mL, which is 1,600 mcg/mL. If weight is in pounds, first divide by 2.2 (see lb to kg dose calculator).

Seven worked examples

1. Basic
5 mcg/kg/min, 70 kg, 400 mg in 250 mL (1,600 mcg/mL). 5 × 70 × 60 = 21,000 mcg/h. 21,000 ÷ 1,600 =
13.1 mL/h
2. Heavier patient
10 mcg/kg/min, 80 kg, 800 mg in 500 mL (1,600 mcg/mL). 10 × 80 × 60 = 48,000 mcg/h. 48,000 ÷ 1,600 =
30 mL/h
3. Weight in pounds
2 mcg/kg/min, 154 lb, 250 mg in 250 mL (1,000 mcg/mL). 154 ÷ 2.2 = 70 kg. 2 × 70 × 60 = 8,400 mcg/h. 8,400 ÷ 1,000 =
8.4 mL/h
4. Small dose
0.05 mcg/kg/min, 60 kg, 4 mg in 250 mL (16 mcg/mL). 0.05 × 60 × 60 = 180 mcg/h. 180 ÷ 16 =
11.25 mL/h
5. Reverse: dose from the rate
Pump at 20 mL/h, 1,600 mcg/mL, 80 kg. 20 × 1,600 = 32,000 mcg/h. ÷ 60 = 533.3 mcg/min. ÷ 80 kg =
6.67 mcg/kg/min
6. mg/kg/h to mcg/kg/min
0.3 mg/kg/h = 300 mcg/kg/h. ÷ 60 =
5 mcg/kg/min
7. A shortcut: 6 × weight in 100 mL
10 kg child, 60 mg (6 × 10) in 100 mL = 600 mcg/mL. 5 mcg/kg/min: 5 × 10 × 60 = 3,000 mcg/h. ÷ 600 =
5 mL/h, so 1 mL/h = 1 mcg/kg/min

Quick check table

Weight1 mcg/kg/min at 1,000 mcg/mL1 mcg/kg/min at 100 mcg/mL
50 kg3 mL/h30 mL/h
70 kg4.2 mL/h42 mL/h
100 kg6 mL/h60 mL/h

For any other dose, multiply the table value by the ordered dose. Example: 5 mcg/kg/min at 70 kg and 1,000 mcg/mL is 4.2 × 5 = 21 mL/h.

A shortcut you should understand, not just use

The "6 × weight in 100 mL" shortcut (sometimes called the rule of six) works because 6 × kg mg in 100 mL gives 60 × kg mcg/mL, which cancels the weight and the 60 min/h exactly. The result is 1 mL/h for 1 mcg/kg/min. If you do not know why it works, use the full formula; and always check your facility's standard concentrations first.

01

mg and mcg are mixed

Convert mg to mcg first: 1 mg = 1,000 mcg.

02

Minutes are forgotten

Multiply by 60 to go from per minute to per hour.

03

Weight is missing

Multiply by kg. Convert from pounds by dividing by 2.2.

04

The answer is unreasonable

Compare with the quick check table. A result 10 or 60 times off means a unit slip.

05

Time is mixed up

A dose per minute is not a dose per hour. Keep the unit on every number.

Related: IV flow rate calculator, dimensional analysis and concentration calculations. Practice in practice problems.

Study aid only: The numbers on this page are examples for study. They are not clinical doses. Check any real pump rate against your facility's policy, a current drug reference and an independent check.

Where this calculation shows up

Weight-based infusions in mcg/kg/min appear in critical care and emergency settings for drugs that are titrated to effect. In a course, you meet them as a multi-step problem to practice units. The order says a dose per kilogram per minute, the bag label gives total drug in a volume, and the pump needs mL/h. The three facts must be joined.

A useful routine is: (1) convert weight to kg, (2) convert the bag to mcg/mL, (3) compute mcg/h from dose × kg × 60, (4) divide by mcg/mL. Write each result with units on its own line, as in the worked examples. If you prefer the dimensional analysis layout, set up a single line: dose (mcg/kg/min) × weight (kg) × 60 (min/h) × 1 mL/concentration (mcg), and cross out units until only mL/h remains.

Also learn to run the check in reverse. Given a pump rate, compute the dose delivered, as in example 5. If the dose is near what was ordered, your original rate was probably right. For simple IV fluid problems use the IV flow rate calculator.

Frequently asked questions

How do you calculate mL/h from mcg/kg/min?+

Multiply dose × weight (kg) × 60, then divide by the concentration in mcg/mL.

Why multiply by 60?+

The dose is per minute but a pump runs per hour; 60 minutes make an hour.

How do I convert mg/mL to mcg/mL?+

Multiply by 1,000. 1.6 mg/mL is 1,600 mcg/mL.

How do I get concentration from "mg in X mL"?+

Divide mg by mL for mg/mL, then multiply by 1,000 for mcg/mL. 400 mg in 250 mL is 1,600 mcg/mL.

How do I find the dose at a given pump rate?+

Multiply the rate (mL/h) by the concentration (mcg/mL), divide by 60 and then by the weight in kg.

What does 6 × weight in 100 mL mean?+

A common pediatric preparation: 6 × kg mg in 100 mL makes 1 mL/h equal to 1 mcg/kg/min.

How do I convert mg/kg/h to mcg/kg/min?+

Multiply by 1,000 to get mcg/kg/h, then divide by 60.

Are the doses on this page real?+

No. They are study numbers with generic drugs, not recommendations.

Practice pump calculations

Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.